SRNE 5000W 220V 48V Hybrid-Wechselrichter HF4850S80-H
SRNE 5000W Hybrid Solar Inverter 220V 230V DC 48V Pure Sine Wave Inverter Build-in MPPT PV-input Max 500VDC Support WIFI Module
Note :The battery capacity of the correct matching system is determined according to the specific usage requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult online customer service.
Model: HSI 5500 can't be parallel; Model: HSI 5500P can be connected in parallel to form three phases
Introduction:
HSI series corresponds to SRNE HF series; HSI/HF series is a new hybrid solar charge inverter, which integrates solar energy storage &means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrialstandard. Four charging modes are optional,i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; and two output modes are available,i.e. Inverter and Mains, to meet different application requirements. The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real time.
MODEL | HSI 5500P | HSI 5500 | CAN BE SET |
INVERTER | |||
Rated Output Power | 5,500W | 5,500W | |
Max.Peak Power | 11,000VA | 11,000VA | |
Rated Output Voltage | 230Vac(single phase/three phase-paralleled) | 230Vac(L/N/PE single phase) | √ |
Load Capacity of Motors | 4HP | 4HP | |
Rated AC Frequency | 50Hz/60Hz | 50Hz/60Hz | √ |
Waveform | Pure Sine Wave | Pure Sine Wave | |
Switch Time | 10ms (typical) | 10ms (typical) | |
Parallel Capacity | 1-6 | / | |
BATTERY | |||
Battery Type | Lead-acid /Li-ion /User defned | Lead-acid /Li-ion /User defined | √ |
Rated Battery Voltage | 48V | 48V | |
Voltage Range | 40~60Vdc | 40~60Vdc | √ |
Max.MPPT Charging Current | 100A | 100A | √ |
Max.Mains/Generator Charging Current |
60A | 60A | √ |
Max.Hybrid Charging Current | 100A | 100A | √ |
PV INPUT | |||
Num.of MPPT Trackers | 1 | 1 | |
Max.PV Array Power | 6,000W | 6,000W | |
Max.Input Current | 22A | 22A | |
Max.Voltage of Open Circuit | 500Vdc | 500Vdc | |
MPPT Voltage Range | 120-450Vdc | 120-450Vdc | |
UTILITY/GENERATOR INPUT | |||
Input Voltage Range | UPS mode:170~280Vac;APL mode:90~280Vac | UPS mode:170~280Vac;APL mode:90~280Vac | √ |
Frequency Range | 50/60Hz | 50/60Hz | |
Bypass Overload Current | 40A | 40A | |
EFFICIENCY | |||
MPPT Tracking Effciency | 99.9% | 99.9% | |
Max.Battery Inverter Efficiency |
92% | 92% | |
GENERAL | |||
Dimensions | 426*322*124mm(1.40*1.06*0.41ft) | 426*322*126mm(1.40*1.06*0.41ft) | |
Weight | 10.5kg(23.15lb) | 10.5kg(23.15lb) | |
Protection Degree | IP20,Indor Only | IP20,Indor Only | |
Operating Temperature Range | -10℃~55℃ | -10℃~55℃ | |
Noise | ≤60dB | ≤60dB | |
Cooling Method | Internal Fan | Forced air cooling with adjustable air speed | |
Warranty | 1.5 Years | 1.5 Years | |
COMMUNICATION | |||
Embedded Interfaces | RS485 /USB/Dry contact | RS485/USB /Dry contact | √ |
External Modules (Optional) | Wi-Fi/GPRS | Wi-Fi/GPRS | √ |
Feature:
1.Full digital voltage and current double closed loop control, advanced SPWM technology,output of pure sine wave.
2.Two output modes: mains bypass and inverter output; uninterrupted power supply.
3. Available in 4 charging modes: Only Solar, Utility Priority, PV Priority, Utility & Solar hybrid charging.
4. Advanced MPPT technology with an efficiency of 99.9%.
5.Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
6. Manual ON/OFF switch controlling AC output.
7.Power saving mode available to reduce empty load loss.
8. Intelligent variable speed fan to efficiently dissipate heat and extend system life.
9. Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
10.Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
Europa
Belgien, Bulgarien, Dänemark, Deutschland, Estland, Finnland, Frankreich, Griechenland, Irland, Italien, Lettland, Litauen, Niederlande, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, Slowakei, Slowenien, Spanien, Tschechische Republik, Ungarn, Vereinigtes Königreich
Unsere Lieferzeitinformationen auf einen Blick:
Gesamtlieferzeit = Bearbeitungszeit + Laufzeit (+ alle Feiertage und Wochenenden)
Versand nach USA/Nordamerika
Lagerhaus |
Versandoption |
Bearbeitungszeit |
Voraussichtliche Lieferzeit |
---|---|---|---|
USA/Kanada |
Fedex/DHL/UPS (steuerfrei) |
1~3 Werktage |
3~7 Werktage |
CN |
Per Sea+Express (Fedex/DHL/UPS, steuerfrei) |
3~7 Werktage |
30 ~ 45 arbeitstage |
Versand in die EU
Lagerhaus |
Versandoption |
Bearbeitungszeit |
Voraussichtliche Lieferzeit |
---|---|---|---|
DE/POL |
DHL/GLS/DPD/UPS/TNT (steuerfrei) |
1~3 Werktage |
3~7 Werktage |
CN |
Per Bahn/Sea+Express (DHL/GLS/DPD/UPS/TNT, steuerfrei) |
3~7 Werktage |
45 ~ 60 arbeitstage |
Versand nach Asien-Pazifik/Naher Osten
Lagerhaus |
Versandoption |
Bearbeitungszeit |
Voraussichtliche Lieferzeit |
---|---|---|---|
CN |
Auf dem Seeweg/Eisenbahn+Express (DPD/Maut/UPS/Fedex/TNT, steuerfrei) |
3~7 Werktage |
45 ~ 60 arbeitstage |
1. Wir versenden nach Qualitätstest, Kontrolle und guter Verpackung an unsere Versandagentur. 3-7 Werktage.
2. Die Reederei sammelt genügend Waren für einen Container und verschifft sie dann auf dem Seeweg nach Deutschland. 7-15 Werktage. Gleichzeitig senden sie die Bestellinformationen an DPD Express, um die Sendungsverfolgungsnummer zu erhalten.
3. Nach etwa einmonatiger Seereise zum deutschen Hafen.
4. Der Spediteur erledigt die Zollabfertigungsformalitäten, sortiert die Pakete und sendet sie dann an das entsprechende DPD-Expresslager. 5-7 Werktage
5. DPD Express beginnt mit der Lieferung an die Kunden. Ab sofort wird die Logistik von DPD Express aktualisiert. Lieferzeit 3–7 Tage.
In den Schritten 2-4 steht bei den Tracking-Updates immer „DPD Rechenzentrum, Bestellinformationen wurden an DPD übermittelt.“