SRNE On/Off Grid 5500W Hybrid Inverter IP65 - HES4855S100-H
SRNE 5500W Solar Inverter Pure Sine Wave 48V 230VAC PV Panel Input 500vdc MPPT 100A Solar Controller For 48V Lithium Battery Support WIFI Module HES4855S100-H
Note :
The battery capacity of the correct matching system is determined according to the specific usage requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult online customer service.
Introduction:
HES series is a new type of solar hybrid inverter, integrating solar energy storage and mains charging and AC
sine-wave output. It is controlled by DSP and has the features of high response speed, high reliability and high
industrial standard through state-of-art control algorithm. It has four charging modes: solar only, mains priority, solar
power priority and solar hybrid; two output modes of inverter and Mains Power can be selected to meet different
application requirements.
The solar charging module adopts the latest optimized MPPT technology, which can quickly track the MPP of PV array in any environment, obtain the maximum energy of solar panel in real time, and has a wide MPPT voltage range.
AC-DC charging module adopts state-of-art control algorithm for full digital double closed-loop control of
voltage and current, which has high control precision and small size. Wide AC voltage input range, complete I/O
protection functions, stable and reliable realization of battery charging and protection.
The DC-AC inverter module is based on all-digital intelligent design, adopting state-of-art SPWM technology,
outputting pure sine wave, converting DC to AC, and thus suitable for AC loads such as household appliances, electric
tools, industrial equipment, electronic audio and video, etc. The product adopts sectional LCD display design, which
displays the running data and running status of the system in real time. The comprehensive electronic protection
function can ensure that the entire system be safer and more stable
Functional characteristics:
1. Sectional charging and discharging function available, able to enable and disable AC charging function based on the charging section time be set, switch power supply mode between inverter and AC bypass based on the
discharge section time be set.
2. Anti-counter-current grid-connected function (PV and mains hybrid power supply).
3. It has insulation impedance and leakage current detection function.
4. Support for use under battery-free conditions.
5. It has double activation function of lithium battery, which can be triggered by connecting any mains/PV power.
6. With the function of ECO mode and reducing no-load loss.
7. There are 4 charging modes available: solar only, Mains Power first, solar first and hybrid charging.
8. It has two output modes: Mains Power bypass and inverter output, and has the function of uninterrupted power
supply.
9. It has multiple protection functions for 360° omni-directional protection.
10. Support lead-acid battery and lithium battery access.
11. The ON/OFF switch controls the inverter AC output.
12. PV Grid-connected power generation mode can be set.
13. Adopt full digital voltage and current double closed-loop control, state-of-art SPWM technology and output
pure sine wave.
14. Advanced MPPT technology, the efficiency is as high as 99.9%.
15. LCD screen design, 3 LED indicator lights, dynamic display system data and running status.
16. Adopt intelligent adjustable speed fan to dissipate heat efficiently and prolong the service life of the system.
17. Complete short circuit protection, over-voltage and under-voltage protection, overload protection and backfeed
protection available
Design characteristics:
·Adopting full-digital double closed loop control, combined with advanced SPWM.technology and pure sine wave output.
·Advanced MPPT technology with efficiency of 99.9%.
·LCD screen and three LED indicator lights can clearly indicate the status and data.
·Intelligent and variable-speed fan, efficiently dissipate heat and extend system life.
·Multiple safety protection functions: short circuit protection, overload protection,reverse polarity protection and so on.
Overview:
Sepecification:
Model |
HES4855S100-H |
Battery Input Parameters |
|
Battery Type |
Lead-acid Battery or Lithium Battery |
Rated Battery Input Voltage |
48V ( Minimum Startup Voltage 44V) |
Hybrid Charging Maxi |
100A |
Battery Voltage Range |
40Vdc~60Vdc ± 0.6Vdc(Undervoltage Warning/Shutdown Voltage/Overvoltage |
AC Output Parameter |
|
Output voltage waveform |
Pure sine wave |
Rated Output Voltage (Vac) |
230Vac (200/208/220/240Vac) |
Rated Output Power (VA) |
5500(4780/4970/5260/5500) |
Rated Output Power(W) |
5500(4780/4970/5260/5500) |
Peak Power |
11000VA |
On-load Motor Capacity |
4HP |
Output Frequency Range(Hz) |
50Hz ± 0.3Hz/60Hz ± 0.3Hz |
Maximum Efficiency |
>92% |
No-load Loss |
Non Energy-saving Mode: ≤100W Energy-saving Mode:≤50W (Manual Setup) |
Solar Input Parameters |
|
Maximum PV Open-circuit |
500Vdc |
PV Working Voltage Range |
120-500Vdc |
MPPT Voltage Range |
120-450Vdc |
Maximum PV Input Current |
22A |
Maximum PV Input Power |
6000W |
Maximum PV Charging Current |
100A |
Mains Input Parameters |
|
Mains Maximum Charging |
60A |
Rated Input Voltage |
220/230Vac |
Input Voltage Range |
UPS Mains Mode:(170Vac~280Vac)土2% APL Generator Mode:(90Vac-280Vac)±2% |
Frequency |
50Hz/ 60Hz (Automatic Detection) |
Mains Charging Efficiency |
>95% |
Switch Time (bypass and inverter) |
10ms(Typical Value) |
Maximum Bypass Overload Current |
40A |
Basic Parameters |
|
Specification authentication |
CE(IEC 62109-1) |
EMC authentication grade |
EN61000,C2 |
Operation temperature range |
-15°C to 55°C |
Storage temperature range |
-25°C ~ 60°C |
Humidity Range |
0% to 100% |
Waterproof Grade |
IP65 |
Dimension (L*W*D) |
556mm*345mm*182mm |
Weight (kg) |
20 |
WIFI Module:
Item Pictures:
Európa
Rakúsko, Belgicko, Bulharsko, Česká republika, Dánsko, Estónsko, Fínsko, Francúzsko, Nemecko, Grécko, Maďarsko, Írsko, Taliansko, Lotyšsko, Litva, Holandsko, Nórsko, Poľsko, Portugalsko, Rumunsko, Slovensko, Slovinsko, Španielsko, Švédsko, Spojené kráľovstvo
Prehľad našich informácií o dodacej lehote:
Celkový čas dodania = čas spracovania + čas prepravy (+ všetky sviatky a víkendy)
Posielajte do USA/Severnej Ameriky
Sklad |
Možnosť dopravy |
Čas spracovania |
Odhadovaný čas doručenia |
---|---|---|---|
USA/CA |
Fedex/DHL/UPS (bez dane) |
1 ~ 3 pracovné dni |
3 ~ 7 pracovných dní |
CN |
Po mori + Express (Fedex/DHL/UPS, bez dane) |
3 ~ 7 pracovných dní |
30 ~ 45 pracovných dní |
Poslať do EÚ
Sklad |
Možnosť dopravy |
Čas spracovania |
Odhadovaný čas doručenia |
---|---|---|---|
DE/POL |
DHL/GLS/DPD/UPS/TNT (bez dane) |
1 ~ 3 pracovné dni |
3 ~ 7 pracovných dní |
CN |
Železničnou/námornou + expresnou dopravou (DHL/GLS/DPD/UPS/TNT, bez dane) |
3 ~ 7 pracovných dní |
45 ~ 60 pracovných dní |
Loď do Ázie a Tichomoria/na Blízky východ
Sklad |
Možnosť dopravy |
Čas spracovania |
Odhadovaný čas doručenia |
---|---|---|---|
CN |
Po mori/železnici+expres (DPD/Toll/UPS/Fedex/TNT, bez dane) |
3 ~ 7 pracovných dní |
45 ~ 60 pracovných dní |
1, Expedujeme do našej prepravnej agentúry po teste kvality, kontrole a dobre zabalené. 3-7 pracovných dní.
2, Prepravná agentúra zhromaždí dostatok tovaru pre kontajner a potom pošle do Nemecka po mori. 7-15 pracovných dní. Zároveň pošlú informácie o objednávke spoločnosti DPD express, aby získali sledovacie číslo.
3, Po asi mesačnej plavbe po mori do nemeckého prístavu.
4, Prepravca vybaví formality colného odbavenia, roztriedi balíky a potom ich odošle do príslušného expresného skladu DPD. 5-7 pracovných dní
5, DPD express začne doručovať zákazníkom, odteraz bude logistika aktualizovaná spoločnosťou DPD express. Dodanie 3-7 dní.
V 2-4 fázach aktualizácie sledovania vždy píšu "Dátové centrum DPD, informácie o objednávke boli prenesené do DPD."
TOTO


SGS

ISO9001

KC

IEC

Test UN38.3


MSDS

